Blue-Car The Light 1L

Two-component putty is intended for filling the cavities and unevenness. Thanks to the use of light fillers, it has the correct weight lower by about 40% compared to typical putty. It has high flexibility , which creates the possibility of using on elements susceptible to mechanical vibrations.

Application:

can be applied to large surfaces , does not flow and does not shrink during curing. It is resistant to temperature , works well with most paints and varnishes available on the market.

is ideal for mechanical and manual grinding. Для професійного використання в фарбуванні автомобілів. polyester

Usage:

The galvanized and aluminum surface should be matted before with abrasive non -woven fabric.

The ingredients carefully mix Put the putlands

put the putty on sanded, cleaned and degreased substrate. The thickness of a single layer should not exceed 4-5 mm.

Between the appointments take breaks to evaporate the thinners.

galvanized and aluminum surface should be matted previously with abrasive non-woven fabric.

Note! Do not use at a temperature below 10˚с.

Технічні дані:

• Температура/ Твердість утиліти: при 20 C - 20 хв. При 60 C - 10 хв
• . Production time (from mixing with the curfew): from 4 to 6 min. at 20˚с.
• колір: білий.